Compatible with the PGA, PEB, PESB, BPES and EFB-CP Rainbird Valves
1 Solenoid
2 WC20 connectors
2 Wire-Nuts
1 White Solenoid Seal
Features & Benefits
Field Devices are installed along the 2-Wire path to interface with valves and other hardware.
Interfaces with LX-IVM to control station valves and master valves
Rain Bird WC20 connectors (included with IVMSOL) to be used for all splices
This product can be used in conjunction with the ESP-LXIVM Series Controllers and its respective ESP-LXIVM 2-Wire Field Devices. These devices (sold separately) include the:
IVM-SOL: Control station or master valves
IVM-OUT: Interfaces with LX-IVM to manage 3rd party valves and external gear such as pump stations
IVM-SEN: Interfaces with LX-IVM to control weather sensors or flow sensors
IVM-SD: provides surge protection on the 2-Wire path
Product Details
IVM-SOL Installation
Use pressure sprayer to clean equipment
Check that O-rings are free from damage or debris
Attach IVM-SOL hand-tight (with no water pressure)
Note:It's normal to hear a brief ratcheting sound during installation of the IVM-SOL on valve.
Use IVM-SOL to connect valves on the 2-Wire path.
Connect the red and black wires on the IVM-SOL to the 2-Wire Path
For future troubleshooting or modifications, it is recommended to leave an additional 3 feet (1 meter) of 2-Wire cable stored in each valve box location.
Note: If the valve is NOT at the end of the 2-Wire Path then make a three-way splice; the red wire from the IVM-SOL to the two red wires of the 2-Wire Path; then splice the IVM-SOL black wire to the two black wires of the 2-Wire Path. Use only WC20 splice kits for all wiring connections to the 2-Wire Path. Improper wiring can cause serious damage to your controller or irrigation system.