Hydrawise Pro HC Manual | Waterpro

Hydrawise Pro HC Manual

Brochures & Manuals / Hydrawise

Hydrawise Pro HC Manual

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this presentation by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

12.

4. 4

10. 10

3. 3

9. 9

11. 11

7. 7

8. 8 Wiring for standard Hydrawise 0.75" (20mm) or 1" (25mm) flow meters is as follows: Flow Meter Wire Label on Controller Blue SEN-1, SEN-2 White SEN COM Red Not connected Wiring for open/closed contact sensors is as follows: Sensor Wire Label on Controller Normally Open / Normally Closed wire SEN-1, SEN-2 Second (common) wire SEN COM

5. 5 Note: The indoor Pro-HC is not water or weather resistant, and must be installed indoors or in a protected area. This device is not intended for use by young children. Never let children play with this device.

1. hunterindustries.com Quick Start Guide Hy dr a wi se ™ Ready

2. 2 Installation 3 Connecting AC Power 5 Connecting Station Wires 7 Connecting Sensors or Flow Meters 8 Connecting to a Wi-Fi Network 9 App Configuration 10

6. 6 HOT ( Black ) NEUTRAL ( White ) GROUND ( Green ) Note: To be performed by a licensed electrician only. Always use UL listed ½" (13 mm) conduit with male adapter when installing AC wiring. Pro-HC controllers are intended to be supplied AC power with an over-current protected device. Improper installation could result in shock or fire hazard. This device is not intended for use by young children. Never let children play with this device.

Views

  • 812 Total Views
  • 664 Website Views
  • 148 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+