Grundfos Unilift AP12.40.02.1 Manual Sump Pump 96001872
$9.95 Postage on Irrigation | Free For $200+
Secure Checkout & Payment
All UNILIFT KP pumps are mostly made of stainless steel, with a stainlesssteel sleeve for cooling during operation. The pumps are small and handy, suitable for permanent installation or asa portable pump. The suction strainer at the bottom of the pump prevents particles larger than the pump is designed for from entering. The suction strainer is clipped on to the pump housing for easy removal, in case of maintenanceVertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible single phase canned motor in insulation Class F with thermal overload protection. The pump is fitted with suction strainer and a carrying handle and is supplied with a 5 meter mains cable and float switch for automatic start and stop. The impeller is a semi-open impeller for 10mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids. The pump has a double shaft seal consisting of two lip seals with grease in-between. The pump has an outer casing ensuring continuous cooling of the motor by the pumped liquid. The rotor shaft operates in two maintenance-free carbon bearings cooled by the pumped liquid. The motor is filled with a non-toxic motor liquid.